The Hermitage molding workshop make a full range of works on the design and facades decoration with stucco facade decoration.
Professionally perform the full range of design and finishing works:
- Consultations and development of an individual design project;
- Facade decoration elements making on its own high-tech production;
- Transportation, loading and unloading;
- Installation, decoration of facades;
- Finishing, artistic decoration of facades.
Our stucco facade decor will harmoniously transform and complement the facade of a country house, and give accent to any building in the metropolis, be it a residential building, an office building, a shopping complex or another building.
INSTALLATION OF STUCCOWORK
Installation of stucco is not such a complicated process, as the making, but requires skill and accuracy. Products from plaster are recommended to be fixed in 2-3 days after production. All gypsum products must be soaked with water before installation. Stucco is installed on the prepared surface. Previously, wall and ceiling must be marked and the necessary scratching to roughen must be made. Immediately before installation, the work surface should be moistened with plenty of water. The solution for the installation of stucco prepared from glue and plaster. If the stucco is large, then it is additionally fastened with nails or screws. The seams and holes are closed with plaster mortar.
COLOURING OF STUCCOWORK
Plaster decoration can be painted with any paint. Water-soluble emulsion paints for ceilings are the most commonly used. Before painting, the gypsum product must be completely dried and must be cleared of dirt and dust, and must also be primed. Very good as the primer is the paint, which is supposed to colour the stucco, only very diluted (with water, if it is water-based or special solvents). Priming is necessary for deeper penetration of paint. On the surface of stucco, you can also make any art painting of your choice. Liquefiable or oil paints are used for this.